Remote Control Operating Instructions
Pairing the Remote Control to Your Fan
Within 10 min of plugging fan to power source, press and hold button for 5 sec. to pair remote control and fan. Successful pairing will trigger a beep alert
Remote Control Button Definitions
Turns the fan off.
Switches between summer mode and winter mode
•Summer mode - (Counter-clockwise) A downward airflow creates a cooling effect.
•Winter model - (Clockwise)
An upward airflow moves warm air away from the ceiling area and redistributes it around the living space.
Turns the fan on and decreases fan speed.
Turns the fan on and Increases fan speed.
Switches the fan speed between nature mode and normal mode. Simulates a natural breeze, gentle enoug h not to disturb while you sleep.
Note:Press/hold this button for 5 sec. to turn off the beep. Press/hold button for 5 sec. again to turn it on.
Turns the lights on or off and RF pairing.
Note: Press/hold button for 5 sec. within 10 min. of plugg ing fan to power source to pair remote and fan. Successful pairing will trigger a beep alert
Switches between warm light and cool light. WIFI Troubleshooting.
Note: Press/hold button for 5 sec. till beep alert. The fan will switch to AP M ode, then select AP Mode on APP, follow the APP control instructions and enable fan Wi- Fi
Press/Hold button to decrease the light intensity.
Press/Hold to button to increase the light intensity.
Warning: Do not expose the remote control to direct contact of water.