Voyager Ⅱ Smart Flush Mount Ceiling Fan with LED Light and Wall Switch Outdoor 52 inch

Not for a neutral wire. The Voyager II 52" flush mount wall switch uses a simple two-wire connection, brown to the hot and black to the fan, because the fan's neutral runs straight to the ceiling box. That makes it a practical upgrade in older homes without a neutral in the switch box. It's hardwired, so there are no batteries to replace. Turn off the breaker first, or hire a licensed electrician.

Yes. The Voyager II 52" flush mount comes with both a remote and a wall switch, and either one controls the fan at any time. The wall switch handles on/off, 5 fan speeds, reverse, brightness and 3 color temperatures, while the remote and Carro Home app give you all 10 speeds.

Yes. The Voyager II 52" flush mount has Full Power-Off Memory, so when power returns, or you switch it back on at the wall, it resumes your last fan speed, brightness and color temperature. You don't need to set the light tone again each evening.

No. The Voyager II 52" flush mount gives 1,500 lumens, while the original Voyager 52" gives 2,150 lumens. What the Voyager II adds is a hardwired wall switch and Power-Off Memory. Both are smart, damp-rated flush-mount fans that move up to 4,400 CFM.

Yes. The Voyager II 52" is a flush-mount fan that's damp-rated, so it suits covered porches and patios with flat 8 ft ceilings where a downrod fan would hang too low. Keep it out of direct rain, and install the wall switch in a dry location.

Yes. The Voyager II 52" flush mount wall switch has a reverse button, and you can also reverse from the remote or the Carro Home app. Run it counterclockwise for a summer breeze, and clockwise on a low speed in winter to push warm air down the walls.

Rooms of 145–300 sq ft, such as living rooms, primary bedrooms and medium covered patios. The Voyager II 52" flush mount moves up to 4,400 CFM with 5 blades and a 10-speed DC motor, and uses about 19 W on average, roughly $6 a year.